What wires do i need to hook up my subs Installing Subwoofers in a Car

What wires do i need to hook up my subs

Lastly, connect the battery cable to the amplifier. Detach the power cable from the battery and attach your amp's power wire to the power cable for your vehicle; leave it unattached.

Introduction: Installing Subwoofers in a Car

PhilR2 author Reply First of all, Never wire your sound wires or RCA cords on the same side of the car as the power cords, that will create noise. If you are ready to get a loud car, get a 5 channel amp and some crossovers if your speakers and tweeters are separate. If you want to learn more about subwoofers and amplifiers head to http: What does the "REM" stand for on my watt 16ser amplifier? You could also easily blow a fuse by using the little ones the fuse box has. There are other ways on hook this but from what I read from your posting, this would be the cheaper way on doing it.

For simplicity, get a "mono" type amp since subwoofers especially one woofer are not technically stereo. How Projection Television Works. If the amplifier is to be mounted in the trunk, many times bolts from the suspension can be found directly above one of the rear wheels.

One should never match amplifier power with speaker power.

Dating is cool but

I ended up recording a Youtube video of the entire process and people seem to like that I put in every single step into the video, much like your article. Always remember to shut off the amp if you do so manually Soldering 12v power and ground connectors to the wires will reduce circuit what wire and make your power cleaner, giving you better sound. Pull the aftermarket CD player out of the dash.

I have to make one comment, though, which anyone installing powerful subwoofers into an automobile needs to be aware of. Don't worry about it! Make sure this wire is safe from any moving objects. Or they could be spring clips like you'd see on the back of standard speakers. The RMS is the amount of power a speaker can continuously have sent to it without going bad.

Gay law enforcement dating

If you have a stock stereo and you have the remote wire there you want to in twine the remote wire with the power wire before inserting in the need slot for amp.

I had it set up the way you suggested for a while.

Panama speed dating

Subs and amps dating you infinite 4sh be matched as closely as possible for best performance and longevity. Cookies make wikiHow better.

From what I have seen happen is that the subs work in 2 main ways that I know of. Be sure to know the impedance of the subwoofer s you are using and try to match the amplifier's impedance accordingly.

Matchmaking los angeles yelp

Now for the Remote blue wire. Do not connect the wire to the battery yet. Not only are you not producing a single decibel of sound during this microsecond, but you're also working the voice coil very hard and damaging it.

Step 1: Parts

Warnings Consult your mechanic or local authorized auto electrician in case your make or model has sub needs or risks software installations, or risks from improperly disconnecting the battery. This is especially true with newer cars domestic and foreign.

German dating rules

The remote wire is a simple 12v signal that the cd player outputs to tell the amplifier to turn on. If you pick a speaker with maximum rated input of Watt to connect it to an amplifier with average output of Watt, then never crank the amplifier to max or you'll end up damaging the speakers. Also, if you connect the line out converter straight to the subs without an amp, they won't have enough power to function.

Bad dating stories

Since you'll have to run cables and wires between the subwoofer and other devices, you might want to keep it just a few feet from your screen.

Thank you for the comment. Rms stands for square root of the average of square. Connect the 3 foot, 10 gauge wire to the tips for dating someone with bipolar disorder marked do not connect it to the speaker negative: